Surface Prep

Surface Prep

Before applying any type of floor finish, the substrate must be properly prepared. This process involves cleaning and removing debris from the surface, making repairs, and/or replacing the finish. Surface prep includes a variety of different methods, including shot blasting concrete floors and applying a stain-resistant finish. The final product is affected greatly by the surface preparation. Here are some tips to prepare your floor for flooring. Using a proper stain-resistance sealer is essential for preventing any problems later. For any questions regarding our surface prep and flooring services, feel free to give Floor Logic a call.

Choosing the best type of floor surface prep depends on the type of flooring you plan to install. If your concrete slab is very old, it may need grinding to get rid of stains and other imperfections. However, if you’re laying a new slab, you’ll probably need a self-leveling compound. If you’re installing a new concrete floor, the process of floor surface preparation is crucial to the success of your project.

When selecting a surface prep product, you should pay particular attention to the type of abrasive used. Some of these abrasive pads are coated with a special abrasive. These abrasives are designed to break down contaminants on concrete, including silicon, armor all tire care products, and rubber residue. Some people say that diluted acid opens the pores of the concrete and will make it easier for the coating to adhere. However, the acid used is not actually made by 3M, so the actual amount of product used will differ.

Shot blasting is another way to profile concrete surfaces. It uses a high-speed abrasive to remove surface impurities. The process also leaves virtually no dust. Among the most efficient floor surface prep methods, shot blasting is the fastest and easiest way to profile bare concrete. An abrasive blasting machine guarantees the most accurate mechanical concrete floor grinding. It can remove thin-set mortar and epoxy resin from concrete floors.

Additionally, the costs may include personal protective equipment such as dust masks, safety glasses, heavy boots, and hearing protection. Depending on the type of flooring you’re planning to install, you’ll need to determine how much prep is required for the sub-floor before your installation begins.

After the floor surface prep process, you need to clean up any leftover contamination. Concrete is naturally alkaline, and should be between 11 and 13 degrees Fahrenheit. However, some surface types will need additional decontamination to make a strong bond with a flooring product. For example, if you’re installing a new flooring coating over a contaminated concrete floor, you’ll need to remove the contaminated surface before applying the new one.

For commercial applications, power trowels are worth the investment. These powerful tools carry you through the various stages of floor surface prep. There are ride-on and walk-behind models to fit your needs. And while the equipment is essential, the accessories can make the difference between a good flooring project and a bad one. For instance, some floor prep machines require a separate dust-removal hood to eliminate sludge buildup.

Epoxy Flooring Near Me

Related

Epoxy Flooring Company

Concrete Floor Prep

Floor Removal Company

Concrete Surface Prep

Floor Removal Companies Near Me

Facebook
Twitter
LinkedIn
Pinterest