Floor Logics’ focus is to quickly and efficiently remove existing flooring systems and prepare surfaces for new flooring and/or coatings. Our state-of-the-art highly specialized machines are used, including diamond grinders, shot blasters, milling machines, 2 in-house self-leveling mixing pumps, industrial vacuuming systems, slurry processing machines, and scarifiers. All this equipment is specifically designed to remove existing flooring systems quickly and safely, without damaging the underlying concrete slab. The use of these machines also largely avoids the need for powerful chemicals, which can be hazardous to human health and the environment. By using these state-of-the-art machines, Floor Logic offers surface preparation for premises small and large. If you are in need of the best company for Concrete Floor Surface Prep services look no further than Floor Logic!
Surface preparation (“prep”) is the demolition/removal of existing coating or flooring systems and preparation of the underlying concrete surface through mechanical abrasion for the installation of a new flooring system. Whenever an industrial, commercial or even residential building is being remodeled or renovated, it’s likely that the flooring will need to be at least repaired, and in many cases, it must be completely replaced. In order to install the new flooring system, this existing flooring must first be demolished and removed. Following this, and equally importantly, the concrete slab must be prepared for the installation and preparation of the new flooring system. Only after this can the new finished flooring system be installed.
Surface preparation (“prep”) is the demolition/removal of existing coating or flooring systems and preparation of the underlying concrete surface through mechanical abrasion for the installation of a new flooring system. Whenever an industrial, commercial or even residential building is being remodeled or renovated, it’s likely that the flooring will need to be at least repaired, and in many cases, it must be completely replaced. In order to install the new flooring system, this existing flooring must first be demolished and removed. Following this, and equally importantly, the concrete slab must be prepared for the installation and preparation of the new flooring system. Only after this can the new finished flooring system be installed.
FLOOR LOGIC SURFACE PREPARATION MACHINERY CAN TAKE CARE OF:
- Mastic – Adhesive Removal
- Epoxy Mortar Removal
- Epoxy Coating Removal
- Sealer Removal
- Elastomeric Membrane Removal
- Rubber build-Up removal
- Parking deck and bridge membrane removal
- Paint Removal
- Thinset Removal
- Hardwood Flooring Removal
- Floor Topping Failure
- Damaged Concrete
Concrete Floor Surface Prep
Related
